Most tasks call for a considerable quantity of prep-work to prepared the below flooring for 3/4″ thick tongue-and-groove flooring. New-construction homes do not need this action, as the subfloor is primed as well as ready for floor installation. The actual timber setup might take a number of days or even more, depending on the dimension of your house as well as what kind of custom cutting as well as designs are wanted. Hardwood flooring setup can take anywhere from a couple of days to greater than 2 weeks, depending upon demolition, wood kind, the problem of your subfloor, complete square video footage of the job and also installation method. The subfloor can be any number of materials including concrete, tile, laminate, and so on. You can also set up drifting floorings over existing flooring-a complete game-changer if you’re choosing in between carpet vs. I think much longer would certainly be even much better. Consider it extra as eroding the flooring (60 grit) to remove any type of high spots. Now allow’s start: location medium-grit sandpaper on a hand sander and also sand off the high spots on the subfloor. After the floor is filled it is once again fined sand with the following grit (80) after that screened with 100. These succeeding sandings get any type of sandpaper marks left over from the coarser grits and also prepares the wood for the finish.