Most jobs call for a considerable amount of prep-work to ready the below flooring for 3/4″ thick tongue-and-groove floor covering. New-construction houses do not need this action, as the subfloor is keyed as well as all set for flooring setup. The actual timber installment may take numerous days or even more, depending upon the size of your home as well as what sort of customized cutting and layouts are desired. Hardwood floor setup can take anywhere from a couple of days to greater than two weeks, depending upon demolition, timber type, the problem of your subfloor, total square video footage of the task as well as installment method. The subfloor can be any kind of number of materials consisting of concrete, floor tile, laminate, etc. You can even mount drifting floorings over existing flooring-a complete game-changer if you’re choosing between carpet vs. I think much longer would certainly be even much better. Consider it extra as grinding down the flooring (60 grit) to eliminate any high spots. Now let’s start: location medium-grit sandpaper on a hand sander as well as sand off the high areas on the subfloor. After the flooring is loaded it is once again sanded with the following grit (80) after that screened with 100. These subsequent sandings take out any kind of sandpaper marks left over from the coarser grits and prepares the wood for the finish.