Most jobs require a substantial quantity of prep-work to prepared the below flooring for 3/4″ thick tongue-and-groove flooring. New-construction residences do not need this action, as the subfloor is topped and all set for flooring setup. The real timber installation may take a number of days or even more, depending on the size of your house and what sort of personalized cutting and designs are wanted. Hardwood floor setup can take anywhere from a few days to greater than two weeks, depending upon demolition, wood type, the condition of your subfloor, complete square video of the task as well as installation technique. The subfloor can be any type of variety of products including concrete, tile, laminate, etc. You can even set up floating floors over existing flooring-a total game-changer if you’re choosing in between carpeting vs. I think much longer would certainly be even much better. Consider it a lot more as grinding down the flooring (60 grit) to remove any kind of high spots. Now allow’s begin: location medium-grit sandpaper on a hand sander and sand off the high areas on the subfloor. After the flooring is filled it is once again fined sand with the following grit (80) then screened with 100. These succeeding sandings secure any type of sandpaper marks left over from the coarser grits as well as prepares the wood for the surface.